ilmuku ilmumu

Minggu, 27 Januari 2013

routing dengan protocol rip

untuk memperoleh file simulasi di atas dapat di download di sini
berikut perintah-perintah nya.

Router 0

Router>

Router>enable

Router#configure terminal

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#interface fastEthernet 0/0

Router(config-if)#ip address 192.168.2.1 255.255.255.0

Router(config-if)#no shutdown

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#exit

Router(config)#

Router(config)#interface fastEthernet 0/1

Router(config-if)#ip address 192.168.5.1 255.255.255.0

Router(config-if)#no shutdown

%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up

Router(config-if)#exit

Router(config)#

Router(config)#interface serial 0/0/0

Router(config-if)#ip address 192.168.1.1 255.255.255.0

Router(config-if)#no shutdown

%LINK-5-CHANGED: Interface Serial0/0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0, changed state to up

Router(config-if)#exit

Router(config)#

Router(config)#router rip

Router(config-router)#network 192.168.1.0

Router(config-router)#network 192.168.2.0

Router(config-router)#network 192.168.5.0

Router(config-router)#^Z

Router#

%SYS-5-CONFIG_I: Configured from console by console

Router#copy running-config startup-config

Destination filename [startup-config]?

Building configuration...

[OK]

Router#

Router 1

Router>

Router>enable

Router#configure terminal

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#interface fastEthernet 0/0

Router(config-if)#ip address 192.168.3.1 255.255.255.0

Router(config-if)#no shutdown

Router(config-if)#exit

Router(config)#

Router(config)#interface fastEthernet 0/1

Router(config-if)#ip address 192.168.4.1 255.255.255.0

Router(config-if)#no shutdown

%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up

Router(config-if)#exit

Router(config)#interface serial 0/0/0

Router(config-if)#ip address 192.168.1.2 255.255.255.0

Router(config-if)#clock rate 9600

Router(config-if)#no shutdown

Router(config-if)#exit

Router(config)#

Router(config)#router rip

Router(config-router)#network 192.168.1.0

Router(config-router)#network 192.168.3.0

Router(config-router)#network 192.168.4.0

Router(config-router)#^Z

Router#

%SYS-5-CONFIG_I: Configured from console by console

Router#copy running-config startup-config

Destination filename [startup-config]?

Building configuration...

[OK]

Router#

Router 2

Router>

Router>enable

Router#configure terminal

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#interface fastEthernet 0/0

Router(config-if)#ip address 192.168.5.2 255.255.255.0

Router(config-if)#no shutdown

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#exit

Router(config)#

Router(config)#interface fastEthernet 0/1

Router(config-if)#ip address 192.168.6.1 255.255.255.0

Router(config-if)#no shutdown

%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up

Router(config-if)#exit

Router(config)#

Router(config)#interface serial 0/0/0

Router(config-if)#ip address 192.168.7.1 255.255.255.0

Router(config-if)#no shutdown

%LINK-5-CHANGED: Interface Serial0/0/0, changed state to down

Router(config-if)#exit

Router(config)#

Router(config)#router rip

Router(config-router)#network 192.168.5.0

Router(config-router)#network 192.168.6.0

Router(config-router)#network 192.168.7.0

Router(config-router)#^Z

Router#

%SYS-5-CONFIG_I: Configured from console by console

Router#copy running-config startup-config

Destination filename [startup-config]?

Building configuration...

[OK]

Router#

Router 3

Router>

Router>enable

Router#configure terminal

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#interface fastEthernet 0/0

Router(config-if)#ip address 192.168.8.1 255.255.255.0

Router(config-if)#no shutdown

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#exit

Router(config)#

Router(config)#interface serial 0/0/0

Router(config-if)#ip address 192.168.7.2 255.255.255.0

Router(config-if)#clock rate 9600

Router(config-if)#no shutdown

%LINK-5-CHANGED: Interface Serial0/0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0, changed state to up

Router(config-if)#exit

Router(config)#

Router(config)#router rip

Router(config-router)#network 192.168.7.0

Router(config-router)#network 192.168.8.0

Router(config-router)#^Z

Router#

%SYS-5-CONFIG_I: Configured from console by console

Router#copy running-config startup-config

Destination filename [startup-config]?

Building configuration...

[OK]

Router#

Pc 0

ip address 192.168.2.2

subnet mask 255.255.255.0

default gateway 192.168.2.1

Pc 1

ip address 192.168.3.2

subnet mask 255.255.255.0

default gateway 192.168.3.1

Pc 2

ip address 192.168.4.2

subnet mask 255.255.255.0

default gateway 192.168.4.1

Pc 3

ip address 192.168.8.2

subnet mask 255.255.255.0

default gateway 192.168.8.1

Pc 4

ip address 192.168.6.2

subnet mask 255.255.255.0

default gateway 192.168.6.1

routing dengan protocol rip

untuk memperoleh file simulasi di atas dapat di download di sini

berikut perintah-perintah nya.

Router 0

Router>

Router>enable

Router#configure terminal

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#interface fastEthernet 0/0

Router(config-if)#ip address 192.168.1.1 255.255.255.0

Router(config-if)#no shutdown

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#exit

Router(config)#

Router(config)#interface serial 0/0/0

Router(config-if)#ip address 192.168.2.1 255.255.255.0

Router(config-if)#no shutdown

%LINK-5-CHANGED: Interface Serial0/0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0, changed state to up

Router(config-if)#exit

Router(config)#

Router(config)#router rip

Router(config-router)#network 192.168.2.0

Router(config-router)#network 192.168.1.0

Router(config-router)#^Z

Router#

%SYS-5-CONFIG_I: Configured from console by console

Router#copy running-config startup-config

Destination filename [startup-config]?

Building configuration...

[OK]

Router#

Router 1

Router>

Router>enable

Router#configure terminal

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#interface fastEthernet 0/0

Router(config-if)#ip address 192.168.3.1 255.255.255.0

Router(config-if)#no shutdown

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#exit

Router(config)#

Router(config)#interface serial 0/0/0

Router(config-if)#ip address 192.168.2.2 255.255.255.0

Router(config-if)#clock rate 9600

Router(config-if)#no shutdown

%LINK-5-CHANGED: Interface Serial0/0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0, changed state to up

Router(config-if)#exit

Router(config)#

Router(config)#interface serial 0/1/0

Router(config-if)#ip address 192.168.4.1 255.255.255.0

Router(config-if)#no shutdown

%LINK-5-CHANGED: Interface Serial0/1/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to up

Router(config-if)#exit

Router(config)#

Router(config)#router rip

Router(config-router)#network 192.168.2.0

Router(config-router)#network 192.168.3.0

Router(config-router)#network 192.168.4.0

Router(config-router)#^Z

Router#

%SYS-5-CONFIG_I: Configured from console by console

Router#copy running-config startup-config

Destination filename [startup-config]?

Building configuration...

[OK]

Router#

Router 2

Router>

Router>enable

Router#configure terminal

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#interface fastEthernet 0/0

Router(config-if)#ip address 192.168.5.1 255.255.255.0

Router(config-if)#no shutdown

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#exit

Router(config)#

Router(config)#interface serial 0/0/0

Router(config-if)#ip address 192.168.4.2 255.255.255.0

Router(config-if)#clock rate 9600

Router(config-if)#no shutdown

%LINK-5-CHANGED: Interface Serial0/0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0, changed state to up

Router(config-if)#exit

Router(config)#

Router(config)#router rip

Router(config-router)#network 192.168.4.0

Router(config-router)#network 192.168.5.0

Router(config-router)#^Z

Router#

%SYS-5-CONFIG_I: Configured from console by console

Router#copy running-config startup-config

Destination filename [startup-config]?

Building configuration...

[OK]

Router#

Pc 0

ip address 192.168.1.2

subnet mask 255.255.255.0

default gateway 192.168.1.1

Pc 1

ip address 192.168.3.2

subnet mask 255.255.255.0

default gateway 192.168.3.1

Pc 2

ip address 192.168.5.2

subnet mask 255.255.255.0

default gateway 192.168.5.1

Selasa, 22 Januari 2013

pr untuk tkj xi b

klik di sini untuk download pr

Rabu, 16 Januari 2013

materi SMK TKJ produktif kelas XI

silahkan yang membutuhkan materi ini bisa di download link di bawah ini:

Melakukan Instalasi Perangkat Jaringan Berbasis Luas ( Wide Area Network )

Sabtu, 08 Desember 2012

pengumuman tkj kelas xi

pengumuman

harap melengkapi nilai yang kosong hari ini dan senin

klik untuk memperbesar gambar

1. yang nilai 1 kecil atau kosong, silahkan kerjakan:

membuat biodata dengan sintak html.

2. yang nilai 2 kecil atau kosong, silahakan kerjakan:

buat lh tampilan dari sintak2 html berikut:

smk lingua prima

smk lingua prima
smk lingua prima
smk lingua prima
smk lingua prima
~~smk lingua prima~~
H₂O
smk lingua prima^oke
smk lingua prima
smk lingua prima
smk lingua prima

3. yang nilai tugas nya masih kecil atau masing kosong.

buatlah sebuah tampilan web sederhana dengan menggunakan html, terserah kalian sebagus mungkin, untuk menambah nilai tugas.

kirim kan sintak html nya ke e-mail saya(q_hendra@ymail.com), atau langsung ketemu dengan saya hari ini dan senin.

4. bagi nilai yang masih belum cukup kkm(75) dapat mengerjakan soal ujian yang kemaren dengan jawaban yang benar(bisa di kerjakan di rumah).

pengumuman tkj kelas x

untuk siswa kelas x tkj a dan b yang nilai nya masih ada yang kosong harap secepat nya mengumpulkan lewat e-mail ke saya (q_hendra@ymail.com) sesuai dengan nilai yang kososng, berikut nama-nama nya.

ini soal untuk latihan 1, jawaban di kirim lewat e-mail bagi yang belum mengumpulkan (q_hendra@ymail.com)

Soal Evaluasi 1

1.Apa yang dimaksud dengan scanner ?

2.Sebutkan fungsi modem !

3.Sebutkan beberapa macam printer yang beredar di pasaran !

pr 1

langkah-langkah cara melakukan system restore!

pr 2

sebutkan macam-macam peripheral!

di kirim lewat e-mail bagi yang belum mengumpulkan (q_hendra@ymail.com)